AMX Display factory settings
Updated 10 months ago
If you need to reset your AMX Display to factory settings please make sure any of the settings is the same as the ones found in the table below.
If you do not know how to change the settings, please watch our Display video here:
See below for the standard settings on the AMX Display:
Program | AMX CLASSIC / STEP | AMX MINI | Notes |
P00 | 4 | 4 | Do not amend |
P01 | 8 | 8 | Display brightness (0-9). '0' is off, '9' is brightest |
P02 | 0 | 0 | Units. '0' is km, '1' is miles |
P03 | 36 | 24 | Do not amend |
P04 | 10 | 10 | Auto power-off time (minutes). |
P05 | 1 | 1 | Do not amend |
P06 | 1 | 1 | Do not amend |
P07 | 1 | 1 | Do not amend |
P08 | 27,4 | 20 | Wheel diameter (inches) |
P09 | 30 | 30 | Do not amend |
P10* | 25* | 25* | Speed Limit (km/h) |
P11 | 0 | 0 | Do not amend |
P12 | 2 | 2 | Do not amend |
P13 | 1 | 1 | Do not amend |
P14 | 3 | 3 | Pedal assist strength (0-5). '0' is lowest, '5' is highest. See My AMX feels too powerful for more information |
P15 | 8 | 8 | Do not amend |
P16 | 12 | 12 | Do not amend |
P17 | 31 | 21 | Do not amend |
P18 | 1 | 1 | Do not amend |
P19 | 1 | 1 | Do not amend |
P20 | 1 | 1 | Do not amend |
P21 | 0 | 0 | Do not amend |
P22 | 0 | 0 | Do not amend |
P23 | 0 | 0 | Do not amend |
P24 | 0 | 0 | To restore factory settings, set P24 to '1' |
P25 | 0 | 0 | To reset the odometer, set P25 to '1' |
P26 | 0 | 0 | Do not amend |
*P10 refers to the speed limit of the AMX. Please insure this is set correctly, see here.
